JV33 printer parts
These Parts are used in the Mimaki JV33 printers. 
Pump Tubing (By the Foot)
This is soft tubing that is used inside pumps and as waste lines for many machines. This tube is solvent resistant. This item comes as one long piece for the customer to cut to the needed size.
Mimaki DX5 Printhead for JV33, CJV30 and JV5 Printers (OEM) SKU M007947
This is the Mimaki OEM Printhead that includes the Mimaki head rank board.
Mimaki JV33 Printhead (No Memory Chip) SKU MIM-PRH-002
This is a universal DX5 printhead that is compatible with Mimaki JV33, CJV30 and JV5 printers with part number M007947. This head does not include the head memory chip but does have the head rank sticker on the head itself.
100″ Generic Encoder Strip (Assembly Required) SKU Encoder100
This encoder stip is 100″ long and can be used in all Mutoh, Mimaki and Roland printers. You must uninstall your used encoder strip and lay it on top of the generic encoder strip. Using your old encoder strip as a template, cut the generic strip to the proper length and using a hole punch, or equivalent, punch holes in the proper locations.
Damper Joint Valve Assy. For JV33, CJV30 and JV5 (Claw) SKU MIM-SP-012
This is the valve assembly that connects the damper and the inkline to each other in JV33, CJV30 and JV5 dampers.
Mimaki JV33, JV5 and CJV30 Damper SKU M006579
This is the large damper for the JV33, JV5 and CJV30 printers. Installation instructions available upon ordering.
Mimaki Head Memory Cable SKU E104933
This cable is used in multiple machines to connect the head memory to the slider board.
Mimaki JV33 and CJV30 Full Capping Assembly SKU M007389
This is an OEM full capping station for the JV33 and CJV30 printers.
Mimaki JV33 Drive Belt SKU M800989
This is an OEM Mimaki JV33 drive belt. This belt connects to the Printhead carriage and moves the head back and forth. Make sure to select the proper machine model to receive the correct size belt.
Mimaki JV33 Pinch Roller (Just the Rubber Roller) SKU M700322
This is a pinch roller for a Mimaki JV33 printer. This part number contains 1 single roller.
Mimaki JV33 Scan Motor (Y-Axis Drive Motor) SKU M011924
This is an OEM Mimaki JV33 Scan Motor. This Motor drives the Printhead carriage back and forth.
Mimaki JV33, CJV30 and JV5 Linear Encoder Sensor SKU E103961
This is an OEM Mimaki JV33, CJV30 and JV5 linear encoder sensor.
Mimaki JV33, CJV30 and JV5 Linear Encoder Sensor SKU E103961
This is an OEM Mimaki JV33, CJV30 and JV5 linear encoder sensor.
Mimaki Paper Width Sensor SKU SG113
This is an OEM paper width sensor for Mimaki printers.
2mm O-ring (Pack of 5)
This is the 2mm o-ring that creates a seal between the damper and ink line.
375mA fuse for Mimaki JV33 and CJV30 Replacement for F13 Fuse
This fuse replaces the F13 fuse on the Mimaki JV33 and CJV30 main board.
Cleaning Swabs
Pack of 50 or 100 cleaning swabs for use in the maintenance of large format solvent printers.
Mimaki DX5 Cap Top w/Free Cap Top Slider for JV33 and CJV30 Printers SKU MIM-SP-008a
This is the DX5 Mimaki cap top and slider for the JV33, CJV30 printers. The slider breaks down after years of sliding and can cause cap top alignment issues. With the free slider included with this cap top, you can be sure your maintenance station is working properly. This item does not include the spring and must be reused from the old slider.
Mimaki DX5/DX7 Cap Top SKU M905240
This is the DX5 Mimaki cap top for the JV33, CJV30 and JV5 printers.
Mimaki Ink Pump SKU M004868
This is the pump for the JV3, JV33, CJV30 and JV5 printers. Installation Instructions are available upon ordering.
Mimaki JV33 and CJV30 Cap Slider SKU M602088
This is an OEM Mimaki JV33 and CJV30 cap slider. This item holds the cap top and allows the cap to slide when the Printhead comes to dock with the maintenance station.
Mimaki JV33 and CJV30 Feed Motor (X-Axis) SKU M007619
This is an OEM Mimaki JV33 and CJV30 print feed motor (X-Axis)
Mimaki JV33 and CJV30 Head Cables SKU MIM-SP-016
These cables connect the Mimaki JV33 and CJV30 Printhead to the slider board. They come as a set and require folding to install properly.
Mimaki JV33 and CJV30 Head Height Lock Screw SKU MIM-SP-013
This is an OEM Mimaki JV33 and CJV30 head height lock screw. This part locks the head in place in the low or high head height.
Mimaki JV33 and CJV30 Panel Board Cable SKU E104913
This is an OEM Mimaki JV33 and CJV30 panel board cable. This cable connects the panel board to the station PCB.
Mimaki JV33 and CJV30 Panel PCB Assembly (Screen and Keyboard) SKU M007387
This is an OEM Mimaki JV33 and CJV30 Panel Board. Cable sold separately.
Mimaki JV33 and CJV30 Power Supply Board SKU M013520
This is an OEM Mimaki power supply for the JV33 and CJV30.
Mimaki JV33 and CJV30 PRAM PCB SKU E103819
This is the OEM PRAM board for the Mimaki JV33 and CJV30 printers.
Mimaki JV33 and CJV30 Pump and Wiper Motor SKU E300495
This motor is used to drive the pump and can be used for the wiper motor as well. This is an OEM part that is used in multiple areas of the machine.
Mimaki JV33 and CJV30 Station PCB SKU E104854
This is an OEM Mimaki JV33 and CJV30 station PCB.
Mimaki JV33 and CJV30 Y-Axis Timing Belt (Speed Reduction Belt) SKU 150S2M380G
This belt connects the Y-Axis motor to the drive pulley that moves the Printhead back and forth.
Mimaki JV33 and CJV30 Y-Pulley (Non-Motor Side) SKU M006977
This is the pulley that the drive belt runs along. This pulley is for the non-motor side of the machine.
Mimaki JV33 Front Cover Sensor SKU D3M-01K1-3
This is the sensor that detects whether the front cover is open or closed. (JV33 printer parts)
Mimaki JV33, CJV30 and JV5 Ink ID Board SKU MIM-SP-014
This is an OEM Mimaki JV33, CJV30 and JV5 ink ID board (MP-E105363). This part reads the information off the ink chip located on the ink cartridge and is located in the ink cartridge holder.
Mimaki JV5 Valve N-3 M6 Assy (Ink Cartridge Valve and Needle) SKU M013524
This is the ink valve located behind the ink cartridges which opens and closes the ink flow path.
Mimaki Large Wiper for JV33, CJV30 & JV5 (2 PACK) SKU MIM-SP-011
This is a 2 pack of the large wiper that wipes the Printhead during cleaning.
Mimaki Media Bar End Caps (JV33, CJV30, JV150, JV300, CJV150, CJV300) SKU M400564
This guide cap is attached to the ends of the media bar that holds the media flanges on to the machine. Older models had black plastic caps, but these are the new, stronger, metal pieces.
Mimaki Media Plate 33 (Media edge Protector) SKU M508889
This media plate protects the edges of the media to avoid Printhead strikes. These do not come with the attachment screws so you must re-use the screws in your current machine. (JV33 printer parts)
Mimaki Pack End Sensor (Ink Cartridge Sensor) SKU 1033477
This is an OEM Mimaki pack end sensor. This sensor detects the ink cartridge and ink levels.
Mimaki Sheet Cut Off Blade SKU SPA-0107
This is an OEM, Mimaki sheet cut off blade. It comes with the blade and the blade housing.
Mimaki Y Drive Pulley (JV3, JV4, JV33, CJV30, and JV5) SKU M006891
This is an OEM Mimaki Y Drive Pulley. This part is compatible with the JV3, JV4, JV33, CJV30 and Most JV5 models except the JV5-320.
Printhead Fuse – 750mA, 125V, Quick Blow (Used in Most DX5 and DX7 Based Machines)
This is the fuse that protects the heads from power surges and shorts. The 750-milliamp fuse is used in most DX5 and DX7 Printhead based printers but you should check with your manufacturer or one of our technicians to be sure before purchase. Depending on the model of your machine, this fuse may need to be soldered onto the board, but some boards do have sockets. This fuse should work in both cases.
Aqueous Based Ink DX5 Manifold (Not for Use with Solvent Inks)
If your dye sublimation or other aqueous DX5 Printhead is failing and you have tried everything to recover it, sometimes changing the manifold and flushing the head can fix the issue.
DX5 Solvent Manifold
This is a solvent DX5 Printhead manifold. (JV33 printer parts)
Mimaki JV33 and CJV30 Main PCB (Main board) SKU M011425
This is the Mimaki JV33 and CJV30 OEM main board.
Mimaki JV33 Slider Board SKU E104855
This is an OEM Mimaki JV33 slider board. The slider board is the board that the head and sensors are connected to.
Mimaki 220mL Solvent Washing Cartridge SKU SPC-0294
This OEM Mimaki cleaning cartridge can be used as the automatic wash cartridge for newer models and as a flushing cartridge for all solvent based models. Do not use this cartridge in water-based ink machines.
Download MSDS Specification: MSDS English SS21
JV33 printer parts
Company details: SS21Ink.com
- Fok 8, 8441 BK
- Heerenveen
- The Netherlands
- Email: sales@ss21ink.com
- Phone: +31 6 15609114
- www.ss21ink.com
- VAT: NL001455168B16
For the best compatible canon cartridges please take a look at www.plotterinkt.nl and for the best compatible HP Designjet at www.fennemania.com
Leave A Comment
You must be logged in to post a comment.