Home/Compatible mimaki ink/Mimaki JV33/JV5/CJV30 Dampers

Mimaki JV33/JV5/CJV30 Dampers

Mimaki JV33/JV5/CJV30 Dampers series:

The damper keeps the pressure of ink flow to the print head even so you don’t have too much or too little amount of ink feeding into the head. If you imagine the ink flow and the pressure dropping it would cause starvation to the head and cause drop out of color on and off.

Pressure Stability- If you can image when a print head is printing you have a lot of left and right
movement. This movement is going to cause changes to the pressure of the ink inside the tubes feeding to the print head. The damper keeps the pressure of ink flow to the print head even so you don’t have too much or too little amount of ink feeding into the head. If you imagine the ink flow and the pressure dropping it would cause starvation to the head and cause drop out of color on and off. Too much pressure and the ink could cause the ink to drip.

Mimaki JV33/JV5/CJV30 Dampers

The last function of a damper is to catch and remove any air in the ink before it reaches the head. A bubble in the ink line will reach the damper and then essentially pop inside of it. It you think about a bubble reaching the print head with no damper it would cause a break in the flow of ink when it went through. This would also create a drop out of ink when printing. As you can see the Damper is a very important part of any direct to garment printer. It is also a small plastic part mass produced overseas that works very hard. At some point it will need replacement so purchasing a few to have on hand is always a great idea. They are not considered a warranty part unless they basically fail right out of the box and that is quite rare.

Mimaki JV3 Small Damper & O-ring: SKU: MIM-SP-002

Mimaki JV3 Small Damper & O-ring

Mimaki small dampers are used in most JV3 machines and some textile printers. All of our dampers come with the proper size o-ring for connection to the inkline. Check your printer before ordering dampers for your JV3. All JV3s started with the samll dampers and later customers were able to buy a kit to upgrade to large dampers. Ink Damper and Filter for Mimaki Epson Mutoh Roland with DX4 Print Head

Compatibility:  JV3/JV22/JV2/JV4,

Mimaki JV3 Large Damper W/Adapter & O-Ring: SKU: MIM-SP-001

Mimaki JV3 Large Damper W/Adapter & O-Ring

Large dampers for the JV3 include a 2mm to 3mm inkline adapter for proper fitting. All of our dampers come with the proper size o-ring for connection to the inkline.

Mimaki JV33, JV5 and CJV30 Damper: SKU: M006579

Mimaki JV33, JV5 and CJV30 Damper

This is the large damper for the JV33, JV5 and CJV30 printers.

Mimaki JV34 Dampers: SKU: MIM-SP-019

Mimaki JV34 Dampers

This is the damper for the Mimaki JV34. Each Printhead requires 2 dampers for a full replacement.

Mimaki JV150, CJV150, JV300 and CJV300 Dampers: SKU: MIM-SP-018

Mimaki JV150, CJV150, JV300 and CJV300 Dampers

This is the damper for the Mimaki JV150, CJV150, JV300 and CJV300 printers. A full replacement for each head requires 4 dampers.

SS21ink

Mimaki JV33/JV5/CJV30 Dampers

Company details: SS21Ink.com

  • Fok 8, 8441 BK
  • Heerenveen
  • The Netherlands
  • Email: sales@ss21ink.com
  • Phone: +31 6 15609114
  • www.ss21ink.com
  • VAT: NL001455168B16

 

2020-07-07T12:09:13+02:00July 7th, 2020|0 Comments

About the Author:

Leave A Comment